|
THREE COAT ACRYLIC COLOR SYSTEM FOR TENNIS AND GAME COURTS
PART 1 – GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Division 1 specification sections apply to the work of this section.
1.2 SUMMARY
A. Under this section, the Contractor shall furnish all materials, equipment and labor necessary to finish coat
over an asphalt pavement tennis court as shown on the Drawings and as directed by the Owner’s
Representative.
1.3 SUBMITTALS
A. Submit manufacturer’s product data for materials to be used for sealer and manufacturer’s recommend
specifications, including but not limited to sand, emulsion and equipment..
PART 2 – PRODUCTS
2.1 MATERIALS
A. Action Pave Leveling Binder Patch
B. Action Pave Acrylic Resurfacer
C. Action Pave Acrylic Color Filler
D. Action Pave Acrylic Color Finish
E. Action Pave Acrylic Line Paint
PART 3 – EXECUTION
3.1 GENERAL
A. Surface shall be cleaned prior to application of finish coats.
B. Acrylic color and texture systems shall be applied to clean, dry pavement in conformance with
manufacturer’s instructions and recommendations.
C. Standard: The finished surface shall have no depressions or ridges exceeding one eighth (1/8) inch
in ten (10) feet. Shim low spots with acrylic leveling binder patch.
D. Apply one coat of Acrylic resurfacer to entire area.
E. Apply two coats of acrylic color finish fortified with 80 mesh silica.. Finish coat shall be pigmented by the manufacturer. Use of neutral base coating is not acceptable.
f. Color:
1. Playing court color to be selected.
2. Out of bounds area color to be selected.
g. Hand tape and mark courts with acrylic line paint 2” wide.
THREE COAT ACRYLIC COLOR SURFACE FOR TENNIS AND GAME COURTS
DESIGNED FOR COURTS THAT HAVE BEEN PREVIOUSLY COLOR SURFACED
PART 1 – GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Division 1 specification sections apply to the work of this section.
1.2 SUMMARY
A. Under this section, the Contractor shall furnish all materials, equipment and labor necessary to finish coat
over an asphalt pavement tennis court as shown on the Drawings and as directed by the Owner’s
Representative.
1.3 SUBMITTALS
A. Submit manufacturer’s product data for materials to be used for sealer and manufacturer’s recommend
specifications, including but not limited to sand, emulsion and equipment.
PART 2 – PRODUCTS
2.1 MATERIALS
A. Action Pave Acrylic Crack and Leveling Binder Patch
B. Action Pave Acrylic Resurfacer
C. Action Pave Acrylic Color Filler
D. Action Pave Acrylic Color Finish
E. Action Pave Acrylic Line Paint
PART 3 – EXECUTION
3.1 GENERAL
A. Surface shall be cleaned prior to application of finish coats.
B. Acrylic color and texture systems shall be applied to clean, dry pavement in conformance with
manufacturer’s instructions and recommendations.
C. Standard: The finished surface shall have no depressions or ridges exceeding one eighth (1/8) inch
in ten (10) feet. Shim low spots and fill cracks with acrylic crack and leveling binder patch.
D. Apply one coat of acrylic resurfacer.
E. Apply one coat of acrylic color filler.
F. Apply one coat of acrylic color finish.
G. Color:
1. Playing court to be as existing.
2. Out of bounds area to be as existing
H. Hand tape and mark courts with acrylic line paint 2” wide.
|